Registration

Welcome Speech

- Prof. Dragan Peraković
University of Zagreb, Faculty of Transport and Traffic Science, Croatia
- Assoc. Prof. Lucia Knapčíková, Ph.D.
Technical University of Košice, Faculty of Manufacturing Technologies, Slovak Republic

Keynote Speech

09:15 – 09:45 Prof. Christoph Hupfer (University of Applied Sciences, Karlsruhe, Germany)- Cargo Bikes as a Key Driver for Sustainable Urban Logistics Hochschule Karlsruhe
10:00-10:30 Prof. Petre Lameski (SS. Cyril and Methodius University in Skopje, N.Macedonia)-Technology for Health and Wellbeing in the Workplace

Plenary session/Oral Presentations

Coffee Break/Networking

Lunch

Coffee Break / Networking

Poster Session / Networking

1. Harsha Sammangi (Dakota State University)- Federated Learning for Real-Time Network Intrusion Detection: Towards Privacy, Scalability, and Robustness in Decentralized Cybersecurity
2. Mohammed Al Salti (Sultan Qaboos University), Hafiz M. Asif (Sultan Qaboos University)-Quantum Approximate Optimization Algorithm for MaxCut: A Qiskit- Based Implementation and Analysis
3. Marko Matulin (University of Zagreb, Faculty of Transport and Traffic Sciences); Štefica Mrvelj (University of Zagreb, Faculty of Transport and Traffic Sciences); Marko Periša (University of Zagreb, Faculty of Transport and Traffic Sciences); Domagoj Majić (University of Zagreb, Faculty of Transport and Traffic Sciences)- Genetic Algorithm Enhanced Fuzzy Modeling for Frame Rate and Compression-Aware Video Quality Assessment
4. Katarzyna Antosz (Rzeszow University of Technology); Monika Kulisz (Lublin University of Technology); Justyna Michaluk (Lublin University of Technology); Lucia Knapčíková (Technical University of Košice)- Assessment and Applicability of Machine Learning Models for Quality Monitoring in Electric Vehicle Connector Manufacturing
5. Ivan Cvitić (Faculty of Transport and Traffic Sciences, University of Zagreb); Dragan Peraković (Faculty of Transport and Traffic Sciences, University of Zagreb)-Overview of Routing Approaches in Quantum Key Distribution Networks
6. Shivananda S (Visvesvaraya Technological University, Belagavi, Karnataka, India); Lincy Meera Mathews (Visvesvaraya Technological University, Belagavi, Karnataka, India); Arulmurugan Ramu (Heriot-Watt University); Sathya M (Nadar Saraswathi College of Engineering and Technology, Theni, India)-Data Science Modelling in Agricultural Market Supply Chains: An Overview of the Advantages and Challenges for Supply Optimization and Demand Forecasting
7. Mohamed El-Amine Ouesse (Université Alioune Diop de Bambey, Sénégal); Baboucar Diatta (Université Alioune Diop de Bambey, Sénégal); Adrien Basse (Université Alioune Diop de Bambey, Sénégal); Ridha Bouallegue (Carthage University, Sup’Com, Innov’Com Laboratory, Tunis, Tunisia)-Design of a Smart System IoT for Automatic Irrigation
8. Mohamed El-Amine Ouesse (Université Alioune Diop de Bambey, Sénégal); Baboucar Diatta (Université Alioune Diop de Bambey, Sénégal); Adrien Basse (Université Alioune Diop de Bambey, Sénégal); Ridha Bouallegue (Carthage University, Sup’Com, Innov’Com Laboratory, Tunis, Tunisia)-Design of an Intelligent System for Waste Management Based on IoT
9. Dragan Peraković (Faculty of Transport and Traffic Sciences, University of Zagreb); Gordana Jotanovicc (University of East Sarajevo, Faculty of Transport and Traffic Engineering, Doboj, Bosnia and Herzegovina); Dalibor Dobrilović (University of Novi Sad, Technical faculty “Mihajlo Pupin” Zrenjanin, Serbia); Goran Jauševac (University of East Sarajevo, Faculty of Transport and Traffic Engineering, Doboj, Bosnia and Herzegovina); Vladimir Brtka (University of Novi Sad, Technical faculty “Mihajlo Pupin” Zrenjanin, Serbia); Željko Stojanov (University of Novi Sad, Technical faculty “Mihajlo Pupin” Zrenjanin, Serbia)-Sustainable Transport Model Based on Blockchain Technology
10. Dušan Čatloch (Technical University of Košice); Eva Chovancová (Technical University of Košice); Martin Chovanec (Technical University of Košice)-Phishing Detection Using Machine Learning Algorithms
11. Dragan Peraković (University of Zagreb, Faculty of Transport and Traffic Sciences, Croatia); Ivan Cvitić (University of Zagreb, Faculty of Transport and Traffic Sciences, Croatia); Andela Stanišić (University of Zagreb, Faculty of Transport and Traffic Sciences, Croatia-The Possibility of Applying Large Language Models as a Cyber Attack Method
12. Rebeka Tauberová (Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov); Lucia Knapčíková (Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov); Peter Lazorik (Technical University of Košice, Faculty of Manufacturing Technologies with a seat in Prešov)-Enhancing Manufacturing Sustainability Through Digitalization and Smart Technologies: A Case Study on Waste Management of Used Tires
13. Annamária Behúnová (Technical University of Kosice), Marcel Behun (Technical University of Kosice), Filip Glova (Technical University of Kosice); Lucia Ševčíková (Technical University of Kosice), Vladislav Vavrák (Technical University of Kosice), Industry 5.0 in Logistics of a Company
14. Guanghua Xu (HeiheUniversity); Kuiliang Xia (HeiheUniversity), Control Strategy Scheme Based on Improved SVPWM Active Power Filter
15. Maria Grazianova (Technical university of Kosice, Faculty of Civil Engineering), Analysis of Selected Parameters Involved in the Cost Estimation Processes for the Restoration of Historical Buildings
16. Goncalo Magalhaes (Institute of Engineering, Polytechnic Institute of Porto – ISEP/IPP); André S. Santos (INESC TEC, Institute of Engineering, Polytechnic Institute of Porto – ISEP/IPP); Leonilde Varela (University of Minho); Justyna Trojanowska (Poznan University of Technology), Methodology for planning equipment reconditioning: case study of a mining company
17. Carolina Soares (Institute of Engineering, Polytechnic Institute of Porto – ISEP/IPP); André S. Santos (Interdisciplinary Studies Research Center (ISRC), Institute of Engineering, Polytechnic Institute of Porto – ISEP/IPP and INESC TEC – Instituto de Engenharia de Sistemas e Computadores, Tecnologia e Ciência); Joao Bastos (Interdisciplinary Studies Research Center (ISRC), Institute of Engineering, Polytechnic Institute of Porto – ISEP/IPP and INESC TEC – Instituto de Engenharia de Sistemas e Computadores, Tecnologia e Ciência); Paulo Ávila (Interdisciplinary Studies Research Center (ISRC), Institute of Engineering, Polytechnic Institute of Porto – ISEP/IPP and INESC TEC – Instituto de Engenharia de Sistemas e Computadores, Tecnologia e Ciência); Leonilde Varela (University of Minho), Justyna Trojanowska (Poznan University of Technology), Lean Thinking in Industry 4.0 Environments: Evidence from an Automotive Case Study
18. Darina Duplakova (Technical University of Kosice, Faculty of manufacturing technologies with a seat in Presov), Jan Duplak (Technical University of Kosice, Faculty of manufacturing technologies with a seat in Presov), Viktoria Tutokyova (Technical University of Kosice, Faculty of manufacturing technologies with a seat in Presov), Enes Sukic (Faculty of Information Technology and Engineering – FITI, University Union – Nikola Tesla, 11070 Belgrade), Dejan Kojic (University of Business Engineering and Management, Banja Luka, Republic of Srpska, BA), Real- time Analysis of Occupational Load: Digital Ergonomics Approach in Practice
19. Maroš Begáni (Technical University of Kosice), Lucia Bednárová (Technical University of Kosice), Zuzana Šimková (Technical University of Kosice), Smart and Sustainable: Exploring Energy-Efficient Solutions in Industry 4.0 Production Systems
20. Addisu Alamirew Meku (Bahir Dar University), Investigating the performance of octagonal steel electric lamp poles in Ethiopia using numerical simulations

Social Program

Social evening and Best Paper Awarding for EAI FABULOUS 2025 and EAI MMS 2025

Parallel Sessions

Workshop Session “Action Austria-Slovakia, Sustainable Production Systems - Empowering the next generation of technicians for greener technology“
Workshop Session „Interreg Danube Region Programme, Moving PLastics and mAchine iNdustry towards Circularity (Plan-C)“

Wrap-Up and Closing Remarks, Lunch